Thanks for the back up ed
Scott L
| Fast Tracks https://fast-tracks.net/forums/ |
|
| Wiring HO Code 70 https://fast-tracks.net/forums/viewtopic.php?f=5&t=987 |
Page 1 of 1 |
| Author: | Scott L [ Mon Mar 23, 2009 9:04 pm ] |
| Post subject: | Wiring HO Code 70 |
Hi gang, I have a wiring question. Would it be ok to use selective tutnout control on my hand layed turnouts? I'm planning on using DC control and Caboose ground throws to control the turnouts. Any thoughts? Thanks, Scott L |
|
| Author: | emccamey [ Mon Mar 23, 2009 9:15 pm ] |
| Post subject: | Re: Wiring HO Code 70 |
Scott, Not a problem. The handlaid turnouts (when gaped properly) are 'short resistant' - works well for DCC or for DC. The Caboose ground throws provide plenty of movement to throw points. You'll have to drill a hole on the end of the point throw bar and fit the proper fitting nub of the Caboose - but all is well. The frogs will work much better if energized with wiring - use the Caboose throws with contacts. -ed- |
|
| Author: | Scott L [ Mon Mar 23, 2009 9:20 pm ] |
| Post subject: | Re: Wiring HO Code 70 |
Thanks for the back up ed Scott L
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|