Fast Tracks
https://fast-tracks.net/forums/

Gauntlet Wiring
https://fast-tracks.net/forums/viewtopic.php?f=5&t=1307
Page 1 of 1

Author:  telcoman95 [ Thu Jun 18, 2015 10:19 am ]
Post subject:  Gauntlet Wiring

I am building a gauntlet for our club due to some physical space restraints. The issue is we will be going through the section in one direction into another room making a large loop. On the return route the polarity through the gauntlet is opposite in this direction (like a reversing section). We are trying to avoid any AR's on our layout. With this is mind I need to gap the PCB ties between the rails on each side instead of in the middle as shown on the drawings. That isn't a problem as I see it as long as I be very careful making the isolation gaps. My question is do I still place the gap the same way on the frogs? Do you see any issues gapping between the parallel rails on each side?

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/