Fast Tracks https://fast-tracks.net/forums/ |
|
Atlas Switch Motors - do they work with FastTracks? https://fast-tracks.net/forums/viewtopic.php?f=15&t=990 |
Page 1 of 1 |
Author: | Zoid [ Sat Apr 11, 2009 9:06 pm ] | ||
Post subject: | Atlas Switch Motors - do they work with FastTracks? | ||
Hi All , I have a bunch of Atlas switch motors (and a way to use them under table). Has anyone used these motors with either the solid or hinged Fast Tracks turnouts? I would be happy to share my under table motor design (if you are a CARM member, its in the Canadian). Cheers, Tim
|
Author: | Zoid [ Fri Apr 24, 2009 3:14 pm ] |
Post subject: | Re: Atlas Switch Motors - do they work with FastTracks? |
Hi all, I built my first #4 HO turnout and tested it with my Atlas Under-table motor. Alas, there was not enough torque to hold the points open, so it looks like I might have to try a hinged turnout - I will keep you posted. Cheers, Tim Barnes |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |