Fast Tracks http://fast-tracks.net/forums/ |
|
Turnout Dimensions for Sn3 http://fast-tracks.net/forums/viewtopic.php?f=8&t=852 |
Page 1 of 1 |
Author: | jimmacmn [ Tue May 06, 2008 3:50 pm ] |
Post subject: | Turnout Dimensions for Sn3 |
I am in the process of doing some track planning in Sn3 using 3rd PlanIt. With the new release (8.05) they have a flex turnout capability. This seems to go hand in hand with the TwistTies turnout blocks at Fast Tracks. I want to use a #8 turnout flexed, but all 3rd PlanIt has are #6 turnouts available. I went to the NMRA site to print out the SN3 turnout dimension standards, but they have every Scale/Gauge except for Sn3 in their RP-12.X standards. Is there somewhere I can access these dimensions? Tim you appear to have gotten the dimensions from somewhere since you currently produce fixtures and twist ties for #4 through #8 turnouts in Sn3. Any help out there? |
Author: | Tim Warris [ Wed May 07, 2008 10:59 am ] |
Post subject: | |
Hi Jim, If you navigate to the ordering page for an individual item we have some dimensional information there for that specific turnout size, the Sn3 #8 page can be found here... http://www.handlaidtrack.com/item.php?id=3978 I am not sure what information 3rd PlanIt requires for turnout design, but if something is missing that you need let me know and I would be happy to dig up the numbers from our master CAD files. |
Author: | jimmacmn [ Thu May 08, 2008 10:58 am ] |
Post subject: | |
Tim Thanks. I do remember seeing the data on those pages now that you reminded me. Easy fix! I'll look things up tonight and see if I can plug things in. If there is anything missing, I'll e-mail an info request Jim |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |