Fast Tracks http://fast-tracks.net/forums/ |
|
Rail codes and track fixtures http://fast-tracks.net/forums/viewtopic.php?f=7&t=1164 |
Page 1 of 1 |
Author: | wgp [ Fri Apr 01, 2011 4:39 pm ] |
Post subject: | Rail codes and track fixtures |
I want to start building turnouts in code 125 and 148 using only Micro Engineering rail. If I buy a turnout fixture for code 148 rail, will I be able to build a turnout using code 125 with the same fixture? Thanks, Travis |
Author: | emccamey [ Sat Apr 02, 2011 4:47 pm ] |
Post subject: | Re: Rail codes and track fixtures |
Travis, answer is 'sort of'. The smaller rail will fit in the fixture - but it will not be tightly aligned. You'll have add the use of 2 (rolee type) or 3 point gauges to align the rail heads precisely. Go carefully and check with track gauges - all will work fine. -ed- |
Author: | wgp [ Sun Apr 03, 2011 3:49 pm ] |
Post subject: | Re: Rail codes and track fixtures |
Thanks Ed, I appreciate you chiming in to offer some advice. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |