Fast Tracks http://fast-tracks.net/forums/ |
|
Wheel drop in N scale http://fast-tracks.net/forums/viewtopic.php?f=6&t=957 |
Page 1 of 1 |
Author: | DarylK [ Sun Dec 21, 2008 12:33 am ] |
Post subject: | Wheel drop in N scale |
Completed two #10 turnouts today. Took about 90 minutes for the first one and just under an hour for the second. I think I will eventually get it to about 45 minutes once I get more experienced. Anyway, my question is in regard to wheel drop. Both turnout have wheel drop at the frog when I roll a single truck through. I am using Fox Valley wheels which have smaller wheel treads. The trucks go through the frogs very smoothly when attached to a car, but alone the wheel will drop at the frog. I watched the CAD video on frog wheel drop, but they seemed to be talking more about HO scale. Is it possible to get the frog sharp enough on the N scale fixtures to eliminate the wheel drop? Daryl Kruse |
Author: | emccamey [ Sun Dec 21, 2008 8:37 am ] |
Post subject: | Re: Wheel drop in N scale |
The N scale Fox Valley wheelsets are FINE wheel sets. They are intended for those in fiNescale with tighter track standards. For use with standard N scale trackwork, you'll need to use the additional trick of filling the frogway in with some hardening auto putty and clean out a set for the proper 'shelf' depth to let the flanges ride across the frog area. -ed- |
Author: | DarylK [ Sun Dec 21, 2008 10:44 pm ] |
Post subject: | Re: Wheel drop in N scale |
Well, on my fourth turnout I answered my own question. It is possible to get the frog point in position to eliminate wheel drop in N scale. I wasn't placing the frog point far enough into the wing rails on the first three. I need to now go back and replace the frog point on the first three turnouts. Having lots of fun. Cheers! Daryl |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |