Fast Tracks http://fast-tracks.net/forums/ |
|
Quick Sticks Crossties http://fast-tracks.net/forums/viewtopic.php?f=4&t=929 |
Page 1 of 1 |
Author: | sd80mac [ Wed Sep 10, 2008 4:47 pm ] |
Post subject: | Quick Sticks Crossties |
How big are the spike holes? Can they be ommitted? If not, can they be staggered on either side of the rail? Donnell |
Author: | Ron Warris [ Wed Sep 10, 2008 11:25 pm ] |
Post subject: | Re: Quick Sticks Crossties |
The pre-drilled spike holes in the QuickSticks crossties are actually not holes at all, but small laser cut slots that are only a few thousands of an inch wide. Slots have the advantage of being able to accommodate different sizes of rail and spikes. This is a new design element we are using for the crossties and will be gradually switching to for our older QuickSticks products as well. You can order the QuickSticks crossties drilled or un-drilled. |
Author: | sd80mac [ Thu Sep 11, 2008 8:20 pm ] |
Post subject: | Re: Quick Sticks Crossties |
Thanks for the response Ron. What about staggering the holes? Donnell |
Author: | Ron Warris [ Thu Sep 11, 2008 9:50 pm ] |
Post subject: | Re: Quick Sticks Crossties |
Currently we only offer QuickSticks with or without pre-drilled spike holes. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |