| Fast Tracks http://fast-tracks.net/forums/ |
|
| Assembly jig question http://fast-tracks.net/forums/viewtopic.php?f=4&t=867 |
Page 1 of 1 |
| Author: | jdm_com_au [ Fri May 30, 2008 8:31 am ] |
| Post subject: | Assembly jig question |
From what I can gather, the jigs are made from 6060 T5 aluminium alloy. My question is, how thick is the aluminium before you machine it? I'm just looking at making a couple of jigs to make dual gauge track for my dual gauge turntable. I hope you can appreciate this 4 rail track needs to be extremely accurate, or things won't line up. Despite the fact I will be using the track on a modified indexed turntable. Thanks, John |
|
| Author: | Tim Warris [ Fri May 30, 2008 1:55 pm ] |
| Post subject: | Re: Assembly jig question |
Hi, The aluminum stock we use is 1/4" thick. |
|
| Author: | jdm_com_au [ Sat May 31, 2008 6:20 am ] |
| Post subject: | Re: Assembly jig question |
Thanks for that. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|