| Fast Tracks http://fast-tracks.net/forums/ |
|
| Point filling tool life http://fast-tracks.net/forums/viewtopic.php?f=4&t=780 |
Page 1 of 1 |
| Author: | ford86 [ Sat Nov 17, 2007 4:54 pm ] |
| Post subject: | Point filling tool life |
| Author: | Ron Warris [ Mon Nov 19, 2007 12:40 pm ] |
| Post subject: | |
Tim is taking a week off this week, so I will take a stab at answering your question. When you are using the tool, you should try to file across the entire face to avoid wearing the just the middle part. If the center is worn down, you can 'dress' the tool by filing the whole face flat again, but that may take a bit of effort. Overall this type of wear should have no effect on the results. |
|
| Author: | tetters [ Mon Nov 19, 2007 3:24 pm ] |
| Post subject: | |
If it makes you feel any better, I've done about 20 # 5's with my tool and the turnouts are still coming out great. I'd even say, even better then when the tool was new. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|