Fast Tracks

Hi Ron, hi Tim,

Was looking for HO/HOn3 dual gauge turnout printable track turnouts. You have a page for them under the HO section and the HOn3 section; but, there are no turnout templates under either. I'm looking for both #6 narrow gauge to left and #6 narrow gauge to right.

Thanks.

Curt Goff

Curt,

Go the Templates Library - lower right is "Dual" - that's where they are found.
-ed-

_________________
-ed mccamey-
COSLAR RR - http://www.coslar.us/
NMRA Standards and Conformance Department
PROTO & FINE Scale Coordinator
I estimate I have about 5 pounds of coupler springs somewhere in the vicinity of my workbench.

Hi Ed,

Thanks for the reply. I've looked there; but, there are no templates there. That's why I've asked the question. If anyone else sees templates there, please let me know and perhaps you could email them to me.

Thanks again.

Curt

Curt,

You must have configuration problems with your browser or with Java Script. Wen there and they came up fine - saved the PDF to disk. I'll send them along to your e-mail address if I can attach them via the forum e-mail link.
-ed-

_________________
-ed mccamey-
COSLAR RR - http://www.coslar.us/
NMRA Standards and Conformance Department
PROTO & FINE Scale Coordinator
I estimate I have about 5 pounds of coupler springs somewhere in the vicinity of my workbench.

Ed,

I use Firefox here at home and our club computer also uses Firefox. I/we can't see the templates on either. I've sent you my email address. Thanks for your help.

Curt

Curt,

I also use Firefox.

Going to the HO or the HOn3 and then to the dual tab does in fact NOT work. Go back up to the templates library master page and then to just directly go to the Dual tab (located at the bottom on the right).

Tim or Ron should fix the linkages so that they do go direct from either sequence - but just the Dual tab first does work.

I did get your e-mail and replied with the files you wanted as attachments.

-ed-

_________________
-ed mccamey-
COSLAR RR - http://www.coslar.us/
NMRA Standards and Conformance Department
PROTO & FINE Scale Coordinator
I estimate I have about 5 pounds of coupler springs somewhere in the vicinity of my workbench.

Ed, I will assume you have told Tim and/or Ron about the broken link?

_________________
Now waiting for a better currency exchange rate before I order.

Yes, PM to Ron on the links needing to be recoded or refreshed has been submitted.
-ed-

_________________
-ed mccamey-
COSLAR RR - http://www.coslar.us/
NMRA Standards and Conformance Department
PROTO & FINE Scale Coordinator
I estimate I have about 5 pounds of coupler springs somewhere in the vicinity of my workbench.

Hello All,

Requests for changes or reporting of errors on the Fast Tracks website should go to Tim only from now on. We are aware of the problem with the links for dual gauge track templates and it's on (bottom) of Tim's "To Do" list.

_________________
- Terry -
Customer Service - Fast Tracks HobbyWorks Inc.
service@fast-tracks.net