| Fast Tracks http://fast-tracks.net/forums/ |
|
| TieBreaker Tool for curved turnout construction http://fast-tracks.net/forums/viewtopic.php?f=4&t=1124 |
Page 1 of 1 |
| Author: | cgofftn [ Sat Jul 03, 2010 12:17 pm ] |
| Post subject: | TieBreaker Tool for curved turnout construction |
Hello to all and happy holiday weekend to everyone in Canada and the US. I have a HO scale #10 curved turnout (30R/27R) fixture and am wondering what turnout sized TieBreaker tool to use with this fixture. Do the PCB ties needed for this curved turnout fixture correspond to those needed for a normal #10 turnout or would a #12 (TieBreaker tool) be a closer match? Sorry, I haven't taken the time to compare number and lengths of PCB ties needed in curved vs normal turnout construction. Thanks for any advice/help you can provide. Curt Goff |
|
| Author: | jtfirth [ Sun Jul 04, 2010 2:17 pm ] |
| Post subject: | Re: TieBreaker Tool for curved turnout construction |
Hello Curt, Here's an excerpt from Fast Tracks FAQ's: Can I use the TieBreaker for curved turnouts that have the same frog angle as a regular turnout? Yes, curved turnouts that have the same frog angle as a regular turnout are designed with the PC board ties in the same location and are the same length. Frequently asked questions can be found here: http://www.handlaidtrack.com/kb_results.asp |
|
| Author: | cgofftn [ Sun Jul 04, 2010 5:01 pm ] |
| Post subject: | Re: TieBreaker Tool for curved turnout construction |
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|