Fast Tracks http://fast-tracks.net/forums/ |
|
Developing Good Soldering Techniques - Newsletter #1 http://fast-tracks.net/forums/viewtopic.php?f=2&t=7 |
Page 1 of 1 |
Author: | Tim Warris [ Sun May 09, 2004 6:17 pm ] |
Post subject: | Developing Good Soldering Techniques - Newsletter #1 |
Author: | aussiesteve [ Wed Feb 09, 2005 1:19 am ] |
Post subject: | Re: Developing Good Soldering Techniques - Newsletter #1 |
[quote="Tim Warris"]Developing Good Soldering Techniques [list=1][*]Thoroughly clean the parts you will be soldering being sure that they are free of all dirt and grease. Sand PCB ties with fine sandpaper or emery cloth to remove any oxidization. An ink eraser also works well on PCB material |
Author: | Rob [ Fri Apr 29, 2005 2:37 am ] |
Post subject: | cleaning copper pc ties |
The best thing I've found and the quickest, is the stainless steel wire brushes mounted in a moto tool. A light touch over the whole tie (Pc) shines it up very quickly. Rob |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |