Fast Tracks
http://fast-tracks.net/forums/

Atlas Switch Motors - do they work with FastTracks?
http://fast-tracks.net/forums/viewtopic.php?f=15&t=990
Page 1 of 1

Author:  Zoid [ Sat Apr 11, 2009 9:06 pm ]
Post subject:  Atlas Switch Motors - do they work with FastTracks?

Hi All ,

I have a bunch of Atlas switch motors (and a way to use them under table).

Has anyone used these motors with either the solid or hinged Fast Tracks turnouts?

I would be happy to share my under table motor design (if you are a CARM member, its in the Canadian).

Cheers,

Tim

Attachments:
Complete-Motor-Assembly.jpg
Complete-Motor-Assembly.jpg [ 88.39 KiB | Viewed 7331 times ]

Author:  Zoid [ Fri Apr 24, 2009 3:14 pm ]
Post subject:  Re: Atlas Switch Motors - do they work with FastTracks?

Hi all,

I built my first #4 HO turnout and tested it with my Atlas Under-table motor. Alas, there was not enough torque to hold the points open, so it looks like I might have to try a hinged turnout - I will keep you posted.

Cheers,

Tim Barnes

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/