Fast Tracks

Model Railroading Discussion Forums

Return To The Fast Tracks Website

The Fast Tracks discussion forums have been closed. Click Here for more information.

It is currently Mon Oct 07, 2024 7:25 pm

All times are UTC - 5 hours [ DST ]




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 2 posts ] 
Author Message
PostPosted: Tue May 11, 2010 2:25 pm 
Offline

Joined: Thu Mar 25, 2010 9:35 pm
Posts: 6
I have a crossover on a module I am building with Atlas code 55 #10 turnouts. My goal was to have these controlled by one fascia knob. I had to drill a small hole in the Bullfrog closest to the fascia knob to facilitate a clevis that would activate the other Bullfrog. I was worried about the tight curve in the control rod and guide but it all works great. Because this was all mounted on foam I first mounted the Bullfrogs on thin plywood for added support and to take some of the side to side shock from pushing and pulling the fascia knob. I used Liquid nails and 1-1/2 " #8 screws to secure the plywood to the foam. One of the Bullfrogs is mounted on 2" foam and the other has the throwbar wire running through 4" and both work fine. I did have to replace the supplied wire with a longer .39 wire for the 4" of travel.
My take away from this is to get a double Z bend as supplied in the modular double sided controller kit or a double clevis.

Image


Last edited by jhn_plsn on Sat Nov 30, 2013 12:46 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Jul 20, 2010 3:20 pm 
Offline
User avatar

Joined: Mon Jul 19, 2010 4:27 pm
Posts: 4
Location: Ontario, Canada
Very neat ! Those control rods work in almost any knot you can tie them in... They are quite cool.

Cheers !

_________________
It's not my place to run the train, the whistle I can't blow. It's not my place to say how far the trains allowed to go. It's not my place to shoot off steam, nor even clang the bell. But let the damn thing jump the track and see who catches hell !


Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group