Fast Tracks

Model Railroading Discussion Forums

Return To The Fast Tracks Website

The Fast Tracks discussion forums have been closed. Click Here for more information.

It is currently Sat Dec 07, 2024 7:45 am

All times are UTC - 5 hours [ DST ]




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 3 posts ] 
Author Message
PostPosted: Thu Nov 05, 2015 10:34 pm 
Offline

Joined: Fri Oct 02, 2015 8:32 pm
Posts: 2
What I have done, is use through the hole via's, to bring power from underneath the track, to the top of the tie. Through the hole via's, are used to move power from one side of a double PCB board, to the other. What I do, is drill a 1.1mm hole through the PCB tie. I then place a via, that is 1mm outside diameter, with a .8mm inside diameter from the top down, run a 22AWG stranded wire from the bottom up, through the via, then drop a small bit of solder on top of the tie. I also power the frog this way. Then drill holes through the road bed, and wire to the main power. One last thing, be sure and cut a slot in the copper foil on the bottom of the tie. Didn't think to do this on the first one. :oops:


Attachments:
File comment: Through the hole Via's
IMG_2357.jpg
IMG_2357.jpg [ 96.39 KiB | Viewed 19504 times ]
File comment: A picture taken from the top, showing the via, and and wire soldered in place
IMG_2358.JPG
IMG_2358.JPG [ 105.52 KiB | Viewed 19504 times ]
File comment: Picture taken from the bottom, showing how the wires are attached.
IMG_2359.jpg
IMG_2359.jpg [ 112.55 KiB | Viewed 19504 times ]
Top
 Profile  
 
PostPosted: Fri Jan 08, 2016 6:41 pm 
Offline

Joined: Fri Jan 08, 2016 12:33 am
Posts: 4
Location: Denver CO
What is the current rating on the PCB hopefully more than the 22 ga wire? Where did you get the via's?


Top
 Profile  
 
PostPosted: Wed Jan 13, 2016 11:05 pm 
Offline

Joined: Fri Oct 02, 2015 8:32 pm
Posts: 2
I got the via's from eBay. Not sure what the current capacity of the PCB board would be, but I would guess, it would be 2-3 amps.


Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group